The package CrystCat provides a catalog of crystallographic groups of dimensions 2, 3, and 4 which covers most of the data contained in the book ``Crystallographic groups of four-dimensional space'' BBNWZ78. It has been brought into GAP format by Volkmar Felsch.
The GAP 4 version of the catalog requires the package Cryst, which is loaded automatically. The benefit of this is that space groups extracted from the catalog now have the rich set of methods provided by Cryst at their disposal, and are no longer dumb lists of generators. Moreover, space groups are now fully supported in both the representation acting from the left and the representation acting from the right.
In 2001, Bernd Souvignier has discovered an error in the above mentioned book: On page 118, in the tabulation of enantiomorphic space-group types, it is wrongly claimed that the (affine) four-dimensional space-group type 08/01/01/002 splits into an enantiomorphic pair of (proper) space-group types. This is indicated by an asterisk preceding the space-group number. This asterisk has to be removed. As a consequence, the number of four-dimensional space-group types splitting into enantiomorphic pairs (given on page 11 and page 52 of the book) reduces from 112 to 111. An erratum has been submitted to Acta Cryst..
The only implication of this correction for the package CrystCat is that the output of the function
DisplaySpaceGroupType( 4, 8, 1, 1, 2 );had to be changed from
#I *Space-group type (4,8,1,1,2); orbit size 2; fp-freeto
#I Space-group type (4,8,1,1,2); orbit size 2; fp-freeThis has been done in the release GAP 4.3.
Among others, the catalog offers functions which provide access to the data listed in the Tables 1, 5, and 6 of BBNWZ78:
DisplayCrystalFamily function.
DisplayCrystalSystem function can be
used to reproduce the information on the crystal systems
provided in Table 1.
DisplayQClass function,
whereas the FpGroupQClass function can be used to reproduce
the presentations that are listed in Table 1 for the Q-class
representatives.
DisplayZClass function,
and the matrix generators of the Z-class representatives can
be constructed by calling the MatGroupZClass function.
DisplaySpaceGroupType and the
DisplaySpaceGroupGenerators functions can be used to
reproduce all of the information on the space-group types that
is provided in Table 1.
NormalizerZClass function.
CharTableQClass function will compute the
character tables listed in Table 6, whereas the isomorphism
types given in Table 6 may be obtained by calling the
DisplayQClass function.
The display functions mentioned in the above list print their output with different indentation. So, calling them in a suitably nested loop, you may produce a listing in which the information about the objects of different type will be properly indented as has been done in Table 1 of BBNWZ78.
Probably the most important function in the catalog is the
SpaceGroupBBNWZ function which provides representatives of the
affine classes of space groups. A space group of dimension n is
represented by an (n+1)-dimensional rational matrix group as
follows.
If S is an n-dimensional space group, then each element s in S is an affine mapping s: V → V of an n-dimensional R-vector space V onto itself. Hence s can be written as the product of an appropriate invertible linear mapping g: V → V and a translation by some translation vector t ∈ V such that, if we write mappings from the left, we have s(v) = g(v) + t for all v ∈ V.
If we fix a basis of V and then replace each v ∈ V by the column vector of its coefficients with respect to that basis (and hence V by the isomorphic column vector space Rn \x 1), we can describe the linear mapping g involved in s by an n \x n matrix Mg ∈ GLn(R) which acts by multiplication from the left on the column vectors in Rn \x 1. Hence, if we identify V with Rn \x 1, we have s(v) = Mg v + t for all v ∈ Rn \x 1.
Moreover, if we extend each column vector v ∈ Rn \x 1 to a column [ [ v ], [ 1 ] ] of length n+1 by adding an entry 1 in the last position and if we define an (n+1) \x (n+1) matrix Ms = [ [ Mg, t ], [ 0, 1 ] ], we have [ [ s(v) ], [ 1 ] ] = Ms [ [ v ], [ 1 ] ] for all v ∈ Rn \x 1. This means that we can represent the space group S by the isomorphic group M(S) = { Ms | s ∈ S }. The submatrices Mg occurring in the elements of M(S) form an n \x n matrix group P(S), the ``point group'' of M(S). In fact, we can choose the basis of Rn \x 1 such that Mg ∈ GLn(Z) and t ∈ Qn \x 1 for all Ms ∈ M(S). In particular, the space group representatives that are normally used by the crystallographers are of this form, and the book BBNWZ78 uses the same convention.
The representation described above is the one usually used by crystallographers. There is, however, an alternative to the representation of the space group elements by matrices of the form [ [ Mg, t ], [ 0, 1 ] ] as described above. Instead of considering the coefficient vectors as columns we may consider them as rows. Then we can associate to each affine mapping s ∈ S an (n+1) \x (n+1) matrix M\pifs = [ [ M\pifg\pif, 0 ], [ t\pif, 1 ] ] with M\pifg\pif ∈ GLn(R) and t\pif ∈ R1 \x n such that [s(v\pif),1] = [v\pif,1] M\pifs for all v\pif ∈ R1 \x n, and we may represent S by the matrix group M\pif(S) = { M\pifs | s ∈ S }. Again, we can choose the basis of R1 \x n such that M\pifg\pif ∈ GLn(Z) and t\pif ∈ Q1 \x n for all M\pifs ∈ M\pif(S).
From the mathematical point of view, both approaches are equivalent. In particular, M(S) and M\pif(S) are isomorphic, for instance via the isomorphism τ mapping Ms ∈ M(S) to (Mstr)−1. Unfortunately, however, neither of the two is a good choice for our GAP catalog.
The first convention, using matrices which act on column vectors from the left, is not consistent with the fact that actions in GAP are usually from the right.
On the other hand, if we choose the second convention, we run into a problem with the names of the space groups as introduced in BBNWZ78. Any such name does not just describe the abstract isomorphism type of the respective space group S, but reflects properties of the matrix group M(S). In particular, it contains as a leading part the name of the Z-class of the associated point group P(S). Since the classification of space groups by affine equivalence is tantamount to their classification by abstract isomorphism, M\pif(S) lies in the same affine class as M(S) and hence should get the same name as M(S). But the point group P(S) that occurs in that name is not always Z-equivalent to the point group P\pif(S) of M\pif(S). For example, the isomorphism τ: M(S) → M\pif(S) defined above maps the Z-class representative with the parameters [3,7,3,2] (in the notation described below) to the Z-class representative with the parameters [3,7,3,3]. In other words: The space group names introduced for the groups M(S) in BBNWZ78 lead to confusing inconsistencies if assigned to the groups M\pif(S).
In order to avoid this confusion we decided that the first convention
is the lesser evil, and so the GAP catalog follows the book. In
particular, all functions listed in section How to access the data of the book use the convention of the book. The space groups, however,
can be constructed in both representations, so that the user can choose
the one that seems more appropriate in the particular situation.
The function SpaceGroupOnLeftBBNWZ constructs a space group in
the ``crystallographic'' representation acting on the left,
whereas SpaceGroupOnRightBBNWZ constructs a space group in the
representation acting on the right, as preferred by GAP. In order to
avoid long function names (and in order to avoid mixing groups in
different representations), one can set one's own default
with the function SetCrystGroupDefaultAction
(see SetCrystGroupDefaultAction),
which takes as argument either LeftAction of RightAction.
SpaceGroupBBNWZ then constructs a space group in this default
representation. Initially, the default is RightAction.
The space groups constructed from the catalog are matrix groups, which
in addition have the property IsAffineCrystGroupOnLeft (or
IsAffineCrystGroupOnRight, respectively). The package Cryst
provides methods to compute with such groups. Cryst is necessary
for any serious computation with space groups, because the support of
plain GAP for infinite matrix groups (such as space groups) is very
limited.
Before we describe all available catalog functions in detail, we have to add two remarks.
Remark 1: The concepts used in this section are defined in chapter 1 (Basic definitions) of BBNWZ78. However, note that the definition of the concept of a crystal system given on page 16 of that book relies on the following statement about Q-classes:
This statement is correct for dimensions 1, 2, 3, and 4, and hence the definition of ``crystal system'' given on page 16 of BBNWZ78 is known to be unambiguous for these dimensions. However, there is a counterexample to this statement in seven-dimensional space so that the definition breaks down for some higher dimensions.
Therefore, the authors of the book have since proposed to replace this definition of ``crystal system'' by the following much simpler one, which has been discussed in more detail in NPW81. To formulate it, we use the intersections of Q-classes and Bravais flocks as introduced on page 17 of BBNWZ78, and we define the classification of the set of all Z-classes into crystal systems as follows:
From this definition of a crystal system of Z-classes one then obtains crystal systems of f.u. groups, of space-group types, and of space groups in the same manner as with the preceding definitions in the book.
The new definition is unambiguous for all dimensions. Moreover, it can be checked from the tables in the book that it defines the same classification as the old one for dimensions 1, 2, 3, and 4.
It should be noted that the concept of crystal family is well-defined independently of the dimension if one uses the ``more natural'' second definition of it at the end of page 17. Moreover, the first definition of crystal family on page 17 defines the same concept as the second one if the now proposed definition of crystal system is used.
Remark 2: The second remark just concerns a different terminology in the tables of BBNWZ78 and in the current catalog. In group theory, the number of elements of a finite group usually is called the ``order'' of the group. This notation has been used throughout in the book. Here, however, we will follow the GAP conventions and use the term ``size'' instead.
NrCrystalFamilies( dim )
returns the number of crystal families in case of dimension dim. It can be used to formulate loops over the crystal families.
There are 4, 6, and 23 crystal families of dimension 2, 3, and 4, respectively.
gap> n := NrCrystalFamilies( 4 ); 23
DisplayCrystalFamily( dim, family )
displays for the specified crystal family essentially the same information as is provided for that family in Table 1 of BBNWZ78, namely
For details see BBNWZ78.
gap> DisplayCrystalFamily( 4, 17 ); #I Family XVII: cubic orthogonal; 2 free parameters; #I Q-decomposition pattern 1+3; R-decomposition pattern 1+3; #I 2 crystal systems; 6 Bravais flocks gap> DisplayCrystalFamily( 4, 18 ); #I Family XVIII: octagonal; 2 free parameters; #I Q-irreducible; R-decomposition pattern 2+2; #I 1 crystal system; 1 Bravais flock gap> DisplayCrystalFamily( 4, 21 ); #I Family XXI: di-isohexagonal orthogonal; 1 free parameter; #I R-irreducible; 2 crystal systems; 2 Bravais flocks
NrCrystalSystems( dim )
returns the number of crystal systems in case of dimension dim. It can be used to formulate loops over the crystal systems.
There are 4, 7, and 33 crystal systems of dimension 2, 3, and 4, respectively.
gap> n := NrCrystalSystems( 2 ); 4
The following two functions are functions of crystal systems.
Each crystal system is characterized by a pair (dim, system) where dim is the associated dimension, and system is the number of the crystal system.
DisplayCrystalSystem( dim, system )
displays for the specified crystal system essentially the same information as is provided for that system in Table 1 of BBNWZ78, namely
For details see BBNWZ78.
gap> for sys in [ 1 .. 4 ] do DisplayCrystalSystem( 2, sys ); od; #I Crystal system 1: 2 Q-classes; holohedry (2,1,2) #I Crystal system 2: 2 Q-classes; holohedry (2,2,2) #I Crystal system 3: 2 Q-classes; holohedry (2,3,2) #I Crystal system 4: 4 Q-classes; holohedry (2,4,4)
NrQClassesCrystalSystem( dim, system )
returns the number of Q-classes within the given crystal system. It can be used to formulate loops over the Q-classes.
The following five functions are functions of Q-classes.
In general, the parameters characterizing a Q-class will form a triple (dim, system, q-class) where dim is the associated dimension, system is the number of the associated crystal system, and q-class is the number of the Q-class within the crystal system. However, in case of dimensions 2 or 3, a Q-class may also be characterized by a pair (dim, IT-number) where IT-number is the number in the International Tables for Crystallography Hah95 of any space-group type lying in (a Z-class of) that Q-class, or just by the Hermann-Mauguin symbol of any space-group type lying in (a Z-class of) that Q-class.
The Hermann-Mauguin symbols indexHermann-Mauguin symbol which we
use in GAP are the short Hermann-Mauguin symbols defined in the
1983 edition of the International Tables Hah95, but any
occurring indices are expressed by ordinary integers, and bars are
replaced by minus signs. For example, the Hermann-Mauguin symbol
P―421m will be represented by the string "P-421m".
DisplayQClass( dim, system, q-class )
DisplayQClass( dim, IT-number )
DisplayQClass( Hermann-Mauguin-symbol )
displays for the specified Q-class essentially the same information as is provided for that Q-class in Table 1 of BBNWZ78 (except for the defining relations given there), namely
gap> DisplayQClass( "p2" ); #I Q-class H (2,1,2): size 2; isomorphism type 2.1 = C2; #I Q-constituents 2*(2,1,2); cc; 1 Z-class; 1 space group gap> DisplayQClass( "R-3" ); #I Q-class (3,5,2): size 6; isomorphism type 6.1 = C6; #I Q-constituents (3,1,2)+(3,4,3); ncc; 2 Z-classes; 2 space grps gap> DisplayQClass( 3, 195 ); #I Q-class (3,7,1): size 12; isomorphism type 12.5 = A4; #I C-irreducible; 3 Z-classes; 5 space grps gap> DisplayQClass( 4, 27, 4 ); #I Q-class H (4,27,4): size 20; isomorphism type 20.3 = D10xC2; #I Q-irreducible; 1 Z-class; 1 space group gap> DisplayQClass( 4, 29, 1 ); #I *Q-class (4,29,1): size 18; isomorphism type 18.3 = D6xC3; #I R-irreducible; 3 Z-classes; 5 space grps
Note in the preceding examples that, as pointed out above, the term ``size'' denotes the order of a representative group of the specified Q-class and, of course, not the (infinite) class length.
FpGroupQClass( dim, system, q-class )
FpGroupQClass( dim, IT-number )
FpGroupQClass( Hermann-Mauguin-symbol )
returns a finitely presented group F, say, which is isomorphic to the groups in the specified Q-class.
The presentation of that group is the same as the corresponding
presentation given in Table 1 of BBNWZ78 except for the fact
that its generators are listed in reverse order. The reason for this
change is that, whenever the group in question is solvable, the
resulting generators form a pcgs (as defined in section Polycyclic Groups in the reference manual of GAP) if they are numbered
``from the top to the bottom'', and the presentation is a
power-commutator presentation. The PcGroupQClass function described
next will make use of this fact in order to construct a pc group
isomorphic to F.
Note that, for any Z-class in the specified Q-class, the matrix
group returned by the MatGroupZClass function (see below) not only is
isomorphic to F, but also its generators satisfy the defining relators
of F.
Besides of the usual components, F will have an attribute
CrystCatRecord, which is a record with component
parameters, which keeps a list of the parameters
that specify the given Q-class.
gap> F := FpGroupQClass( 4, 20, 3 ); FpGroupQClass( 4, 20, 3 ) gap> GeneratorsOfGroup( F ); [ f1, f2 ] gap> RelatorsOfFpGroup( F ); [ f1^2*f2^-3, f2^6, f2^-1*f1^-1*f2*f1*f2^-4 ] gap> Size( F ); 12 gap> CrystCatRecord( F ).parameters; [ 4, 20, 3 ]
PcGroupQClass( dim, system, q-class )
PcGroupQClass( dim, IT-number )
PcGroupQClass( Hermann-Mauguin-symbol )
returns a pc group P, say, isomorphic to the groups in the
specified Q-class, if these groups are solvable, or the value
fail (together with an appropriate warning), otherwise.
P is constructed by first establishing a finitely presented group
(as it would be returned by the FpGroupQClass function described
above) and then constructing from it an isomorphic pc group. If the
underlying pcgs is not a prime orders pcgs (see section Polycyclic Groups), then it will be refined appropriately (and a warning will
be displayed).
Besides of the usual components, P will have an attribute
CrystCatRecord, which is a record with component
parameters, which saves a list of the parameters that specify
the given Q-class.
gap> P := PcGroupQClass( 4, 31, 3 ); #I Warning: a non-solvable group can't be represented as a pc group fail gap> P := PcGroupQClass( 4, 20, 3 ); #I Warning: the presentation has been extended to get a prime order pcgs PcGroupQClass( 4, 20, 3 ) gap> GeneratorsOfGroup( P ); [ f1, f2, f3 ] gap> Size( P ); 12 gap> CrystCatRecord( P ).parameters; [ 4, 20, 3 ]
CharTableQClass( dim, system, q-class )
CharTableQClass( dim, IT-number )
CharTableQClass( Hermann-Mauguin-symbol )
returns the character table T, say, of a representative group of (a Z-class of) the specified Q-class.
Although the set of characters can be considered as an invariant of the specified Q-class, the resulting table will depend on the order in which GAP sorts the conjugacy classes of elements and the irreducible characters and hence, in general, will not coincide with the corresponding table presented in BBNWZ78.
CharTableQClass proceeds as follows. If the groups in the given
Q-class are solvable, then it first calls the PcGroupQClass and
RefinedPcGroup functions to get a suitable isomorphic pc group, and
then it calls the CharacterTable function to compute the
character table of that pc group. In the case of the five
Q-classes of dimension 4 whose groups are not solvable, it first
calls the FpGroupQClass function to get an isomorphic finitely
presented group, then it constructs a specially chosen faithful
permutation representation of low degree for that group, and finally
it determines the character table of the resulting permutation group
again by calling the CharacterTable function.
In general, the above strategy will be much more efficient than the
alternative possibilities of calling the CharacterTable function for a
finitely presented group provided by the FpGroupQClass function or
for a matrix group provided by the MatGroupZClass function.
gap> T := CharTableQClass( 4, 20, 3 );;
gap> Display( T );
CharTableQClass( 4, 20, 3 )
2 2 2 1 1 2 2
3 1 . 1 1 . 1
1a 4a 6a 3a 4b 2a
2P 1a 2a 3a 3a 2a 1a
3P 1a 4b 2a 1a 4a 2a
5P 1a 4a 6a 3a 4b 2a
X.1 1 1 1 1 1 1
X.2 1 -1 1 1 -1 1
X.3 1 A -1 1 -A -1
X.4 1 -A -1 1 A -1
X.5 2 . 1 -1 . -2
X.6 2 . -1 -1 . 2
A = -E(4)
= -Sqrt(-1) = -i
NrZClassesQClass( dim, system, q-class )
NrZClassesQClass( dim, IT-number )
NrZClassesQClass( Hermann-Mauguin-symbol )
returns the number of Z-classes within the given Q-class. It can be used to formulate loops over the Z-classes.
The following functions are functions of Z-classes.
In general, the parameters characterizing a Z-class will form a quadruple (dim, system, q-class, z-class) where dim is the associated dimension, system is the number of the associated crystal system, q-class is the number of the associated Q-class within the crystal system, and z-class is the number of the Z-class within the Q-class. However, in case of dimensions 2 or 3, a Z-class may also be characterized by a pair (dim, IT-number) where IT-number is the number in the International Tables Hah95 of any space-group type lying in that Z-class, or just by the Hermann-Mauguin symbol of any space-group type lying in that Z-class.
DisplayZClass( dim, system, q-class, z-class )
DisplayZClass( dim, IT-number )
DisplayZClass( Hermann-Mauguin-symbol )
displays for the specified Z-class essentially the same information as is provided for that Z-class in Table 1 of BBNWZ78 (except for the generating matrices of a class representative group given there), namely
gap> DisplayZClass( 2, 3 ); #I Z-class (2,2,1,1) = Z(pm): Bravais type II/I; fully Z-reducible; #I 2 space groups; cohomology group size 2 gap> DisplayZClass( "F-43m" ); #I Z-class (3,7,4,2) = Z(F-43m): Bravais type VI/II; Z-irreducible; #I 2 space groups; cohomology group size 2 gap> DisplayZClass( 4, 2, 3, 2 ); #I Z-class B (4,2,3,2): Bravais type II/II; Z-decomposable; #I 2 space groups; cohomology group size 4 gap> DisplayZClass( 4, 21, 3, 1 ); #I *Z-class (4,21,3,1): Bravais type XVI/I; Z-reducible; #I 1 space group; cohomology group size 1
MatGroupZClass( dim, system, q-class, z-class )
MatGroupZClass( dim, IT-number )
MatGroupZClass( Hermann-Mauguin-symbol )
returns a dim \x dim matrix group M, say, which is a
representative of the specified Z-class. Its generators satisfy
the defining relators of the finitely presented group which may be
computed by calling the FpGroupQClass function (see above) for the
Q-class which contains the given Z-class.
The generators of M are the same matrices as those given in Table 1 of
BBNWZ78. Note, however, that they will be listed in reverse order
to keep them in parallel to the abstract generators provided by the
FpGroupQClass function (see above).
Besides of the usual components, M will have an attribute
CrystCatRecord, which is a record with two components. The
first component is parameters, which saves a list of the parameters
that specify the given Z-class. The second component is
conjugator, whose value is the identity element of M. Its purpose
is to make the resulting record consistent with those returned by
the NormalizerZClass or ZClassRepsDadeGroup functions described
below.
gap> M := MatGroupZClass( 4, 20, 3, 1 ); MatGroupZClass( 4, 20, 3, 1 ) gap> for g in GeneratorsOfGroup( M ) do > Print( "\n" ); PrintArray( g ); od; Print( "\n" ); [ [ 0, 1, 0, 0 ], [ -1, 0, 0, 0 ], [ 0, 0, -1, -1 ], [ 0, 0, 0, 1 ] ] [ [ -1, 0, 0, 0 ], [ 0, -1, 0, 0 ], [ 0, 0, -1, -1 ], [ 0, 0, 1, 0 ] ] gap> Size( M ); 12 gap> CrystCatRecord( M ).parameters; [ 4, 20, 3, 1 ]
NormalizerZClass( dim, system, q-class, z-class )
NormalizerZClass( dim, IT-number )
NormalizerZClass( Hermann-Mauguin-symbol )
returns the normalizer N, say, in GL(dim,Z) of the representative
dim \x dim matrix group which is constructed by the
MatGroupZClass function (see above).
If the size of N is finite, then N again lies in some Z-class.
In this case, N will have an attribute CrystCatRecord,
which is a record with two components, parameters and conjugator.
These contain, respectively, the list of parameters of that
Z-class, and a matrix g ∈ GL(dim,Z), such that N = g−1 R g,
where R is the representative group of that Z-class.
gap> N := NormalizerZClass( 4, 20, 3, 1 ); NormalizerZClass( 4, 20, 3, 1 ) gap> for g in GeneratorsOfGroup( N ) do > Print( "\n" ); PrintArray( g ); od; Print( "\n" ); [ [ 1, 0, 0, 0 ], [ 0, 1, 0, 0 ], [ 0, 0, 1, 0 ], [ 0, 0, -1, -1 ] ] [ [ 1, 0, 0, 0 ], [ 0, -1, 0, 0 ], [ 0, 0, -1, -1 ], [ 0, 0, 1, 0 ] ] [ [ 0, 1, 0, 0 ], [ -1, 0, 0, 0 ], [ 0, 0, 1, 0 ], [ 0, 0, 0, 1 ] ] [ [ -1, 0, 0, 0 ], [ 0, -1, 0, 0 ], [ 0, 0, -1, 0 ], [ 0, 0, 0, -1 ] ] gap> Size( N ); 96 gap> CrystCatRecord( N ).parameters; [ 4, 20, 22, 1 ] gap> CrystCatRecord( N ).conjugator = One( N ); true gap> L := NormalizerZClass( 3, 42 ); NormalizerZClass( 3, 3, 2, 4 ) gap> Size( L ); 16 gap> CrystCatRecord( L ).parameters; [ 3, 4, 7, 2 ] gap> CrystCatRecord( L ).conjugator; [ [ 0, 0, -1 ], [ 1, 0, 0 ], [ 0, -1, -1 ] ] gap> M := NormalizerZClass( "C2/m" ); <matrix group of size infinity with 5 generators> gap> Size( M ); infinity gap> HasCrystCatRecord( M ); false
Some of the Z-classes of dimension d, say, are ``maximal'' in the sense that the groups in these classes are maximal finite subgroups of GL(d,Z). Generalizing a term which is being used for dimension 4, we call the representatives of these maximal Z-classes the Dade groups of dimension d.
NrDadeGroups( dim )
returns the number of Dade groups of dimension dim. It can be used to formulate loops over the Dade groups.
There are 2, 4, and 9 Dade groups of dimension 2, 3, and 4, respectively.
gap> NrDadeGroups( 4 ); 9
DadeGroup( dim, n )
returns the nth Dade group of dimension dim.
gap> D := DadeGroup( 4, 7 ); MatGroupZClass( 4, 31, 7, 2 )
DadeGroupNumbersZClass( dim, system, q-class, z-class )
DadeGroupNumbersZClass( dim, IT-number )
DadeGroupNumbersZClass( Hermann-Mauguin-symbol )
returns the set of all those integers ni for which the nith Dade group of dimension dim contains a subgroup which, in GL(dim,Z), is conjugate to the representative group of the given Z-class.
gap> dadeNums := DadeGroupNumbersZClass( 4, 4, 1, 2 ); [ 1, 5, 8 ] gap> for d in dadeNums do > D := DadeGroup( 4, d ); > Print( D, " of size ", Size( D ), "\n" ); > od; MatGroupZClass( 4, 20, 22, 1 ) of size 96 MatGroupZClass( 4, 30, 13, 1 ) of size 288 MatGroupZClass( 4, 32, 21, 1 ) of size 384
ZClassRepsDadeGroup( dim, system, q-class, z-class, n )
ZClassRepsDadeGroup( dim, IT-number, n )
ZClassRepsDadeGroup( Hermann-Mauguin-symbol, n )
determines in the nth Dade group of dimension dim all those conjugacy classes whose groups are, in GL(dim,Z), conjugate to the Z-class representative group R, say, of the given Z-class. It returns a list of representative groups of these conjugacy classes.
Let M be any group in the resulting list. M then has an attribute
CrystCatRecord, which is a record with two components. The
component parameters is the list of parameters of the Z-class of
R, and conjugator is a suitable matrix g from GL(dim,Z),
respectively, such that M equals g−1 R g.
gap> DadeGroupNumbersZClass( 2, 2, 1, 2 ); [ 1, 2 ] gap> ZClassRepsDadeGroup( 2, 2, 1, 2, 1 ); [ MatGroupZClass( 2, 2, 1, 2 )^[ [ 0, 1 ], [ -1, 0 ] ] ] gap> ZClassRepsDadeGroup( 2, 2, 1, 2, 2 ); [ MatGroupZClass( 2, 2, 1, 2 )^[ [ 1, -1 ], [ 0, -1 ] ], MatGroupZClass( 2, 2, 1, 2 )^[ [ 1, 0 ], [ -1, 1 ] ] ] gap> R := last[2];; gap> CrystCatRecord( R ).parameters; [ 2, 2, 1, 2 ] gap> CrystCatRecord( R ).conjugator; [ [ 1, 0 ], [ -1, 1 ] ]
NrSpaceGroupTypesZClass( dim, system, q-class, z-class )
NrSpaceGroupTypesZClass( dim, IT-number )
NrSpaceGroupTypesZClass( Hermann-Mauguin-symbol )
returns the number of space-group types within the given Z-class. It can be used to formulate loops over the space-group types.
gap> N := NrSpaceGroupTypesZClass( 4, 4, 1, 1 ); 13
The following functions are functions of space-group types.
In general, the parameters characterizing a space-group type will form a quintuple (dim, system, q-class, z-class, sg-type) where dim is the associated dimension, system is the number of the associated crystal system, q-class is the number of the associated Q-class within the crystal system, z-class is the number of the Z-class within the Q-class, and sg-type is the space-group type within the Z-class. However, in case of dimensions 2 or 3, you may instead specify a Z-class by a pair (dim, IT-number) or by its Hermann-Mauguin symbol (as described above). Then the function will handle the first space-group type within that Z-class, i.e., sg-type = 1, that is, the corresponding symmorphic space group (split extension).
DisplaySpaceGroupType( dim, system, q-class, z-class, sg-type )
DisplaySpaceGroupType( dim, IT-number )
DisplaySpaceGroupType( Hermann-Mauguin-symbol )
displays for the specified space-group type some of the information which is provided for that space-group type in Table 1 of BBNWZ78, namely
gap> DisplaySpaceGroupType( 2, 17 ); #I Space-group type (2,4,4,1,1); IT(17) = p6mm; orbit size 1 gap> DisplaySpaceGroupType( "Pm-3" ); #I Space-group type (3,7,2,1,1); IT(200) = Pm-3; orbit size 1 gap> DisplaySpaceGroupType( 4, 32, 10, 2, 4 ); #I *Space-group type (4,32,10,2,4); orbit size 18 gap> DisplaySpaceGroupType( 3, 6, 1, 1, 4 ); #I *Space-group type (3,6,1,1,4); IT(169) = P61, IT(170) = P65; #I orbit size 2; fp-free
DisplaySpaceGroupGenerators( dim, system, q-class, z-class, sg-type)
DisplaySpaceGroupGenerators( dim, IT-number )
DisplaySpaceGroupGenerators( Hermann-Mauguin-symbol )
displays the non-translation generators of a representative space group of the specified space-group type without actually constructing that matrix group. The generators are given in the representation acting from the left on column vectors.
In more details: Let n = dim be the given dimension, and let M1, …, Mr be the generators of the representative n \x n
matrix group of the given Z-class (this is the group which you will
get if you call the MatGroupZClass function (see above) for that
Z-class). Then, for the given space-group type, the
SpaceGroupOnLeftBBNWZ function described below will construct as
representative of that space-group type an (n+1) \x (n+1) matrix
group which is generated by the n translations which are induced
by the (standard) basis vectors of the n-dimensional Euclidian space,
and r additional matrices S1, …, Sr of the form Si = [
|
| ||
|
|
DisplaySpaceGroupGenerators function
saves time by not constructing the group, but just displaying the r
matrices S1,…, Sr.
gap> DisplaySpaceGroupGenerators( "P61" ); #I Non-translation generators of SpaceGroupOnLeftBBNWZ( 3, 6, 1, 1, 4 ) [ [ -1, 0, 0, 0 ], [ 0, -1, 0, 0 ], [ 0, 0, 1, 1/2 ], [ 0, 0, 0, 1 ] ] [ [ 0, -1, 0, 0 ], [ 1, -1, 0, 0 ], [ 0, 0, 1, 1/3 ], [ 0, 0, 0, 1 ] ]
SpaceGroupOnLeftBBNWZ( dim, system, q-class, z-class, sg-type )
SpaceGroupOnLeftBBNWZ( dim, IT-number )
SpaceGroupOnLeftBBNWZ( Hermann-Mauguin-symbol )
returns a representative, S, of the space group type specified by
the arguments. S is returned in the form of an AffineCrystGroupOnLeft,
which acts from the left on column vectors (see also the description
of the DisplaySpaceGroupGenerators function above). The package
Cryst provides methods for the computation with space groups.
gap> S := SpaceGroupOnLeftBBNWZ( "P61" ); SpaceGroupOnLeftBBNWZ( 3, 6, 1, 1, 4 ) gap> for s in GeneratorsOfGroup( S ) do > Print( "\n" ); PrintArray( s ); od; Print( "\n" ); [ [ -1, 0, 0, 0 ], [ 0, -1, 0, 0 ], [ 0, 0, 1, 1/2 ], [ 0, 0, 0, 1 ] ] [ [ 0, -1, 0, 0 ], [ 1, -1, 0, 0 ], [ 0, 0, 1, 1/3 ], [ 0, 0, 0, 1 ] ] [ [ 1, 0, 0, 1 ], [ 0, 1, 0, 0 ], [ 0, 0, 1, 0 ], [ 0, 0, 0, 1 ] ] [ [ 1, 0, 0, 0 ], [ 0, 1, 0, 1 ], [ 0, 0, 1, 0 ], [ 0, 0, 0, 1 ] ] [ [ 1, 0, 0, 0 ], [ 0, 1, 0, 0 ], [ 0, 0, 1, 1 ], [ 0, 0, 0, 1 ] ] gap> CrystCatRecord( S ).parameters; [ 3, 6, 1, 1, 4 ]
The resulting group has an attribute CrystCatRecord, whose component
parameters specifies the given space-group type.
SpaceGroupOnRightBBNWZ( dim, system, q-class, z-class, sg-type )
SpaceGroupOnRightBBNWZ( dim, IT-number )
SpaceGroupOnRightBBNWZ( Hermann-Mauguin-symbol )
SpaceGroupOnRightBBNWZ( S )
returns a representative, T, of the space group type specified by
the arguments. T is returned in the form of an AffineCrystGroupOnRight,
which acts from the right on row vectors. The generators of T are the
transposed generators (in the same order) of the corresponding
SpaceGroupOnLeftBBNWZ, S, specified by the same arguments.
The space group S is also accepted as argument. The package
Cryst provides methods for the computation with space groups.
gap> T := SpaceGroupOnRightBBNWZ( S ); SpaceGroupOnRightBBNWZ( 3, 6, 1, 1, 4 ) gap> for m in GeneratorsOfGroup( T ) do > Print( "\n" ); PrintArray( m ); od; Print( "\n" ); [ [ -1, 0, 0, 0 ], [ 0, -1, 0, 0 ], [ 0, 0, 1, 0 ], [ 0, 0, 1/2, 1 ] ] [ [ 0, 1, 0, 0 ], [ -1, -1, 0, 0 ], [ 0, 0, 1, 0 ], [ 0, 0, 1/3, 1 ] ] [ [ 1, 0, 0, 0 ], [ 0, 1, 0, 0 ], [ 0, 0, 1, 0 ], [ 1, 0, 0, 1 ] ] [ [ 1, 0, 0, 0 ], [ 0, 1, 0, 0 ], [ 0, 0, 1, 0 ], [ 0, 1, 0, 1 ] ] [ [ 1, 0, 0, 0 ], [ 0, 1, 0, 0 ], [ 0, 0, 1, 0 ], [ 0, 0, 1, 1 ] ]
SpaceGroupBBNWZ( dim, system, q-class, z-class, sg-type )
SpaceGroupBBNWZ( dim, IT-number )
SpaceGroupBBNWZ( Hermann-Mauguin-symbol )
calls either SpaceGroupOnLeftBBNWZ or SpaceGroupOnRightBBNWZ
with the same arguments, depending on the value of the variable
CrystGroupDefaultAction.
FpGroupSpaceGroupBBNWZ( S )
returns a finitely presented group G, say, which is isomorphic to S, where S is expected to be a space group from the BBNWZ catalog (acting from the left or from the right). It is chosen such that there is an isomorphism from G to S which maps each generator of G onto the corresponding generator of S. This means, in particular, that the matrix generators of S satisfy the relators of G. If the factor group of S by its translation normal subgroup is solvable, then the presentation returned is a polycyclic power commutator presentation.
gap> G := FpGroupSpaceGroupBBNWZ( S ); FpGroupSpaceGroupOnLeftBBNWZ( 3, 6, 1, 1, 4 ) gap> for rel in RelatorsOfFpGroup( G ) do Print( rel, "\n" ); od; g1^2*g5^-1 g2^3*g5^-1 g2^-1*g1^-1*g2*g1 g3^-1*g1^-1*g3*g1*g3^2 g3^-1*g2^-1*g3*g2*g4*g3^2 g4^-1*g1^-1*g4*g1*g4^2 g4^-1*g2^-1*g4*g2*g4*g3^-1 g4^-1*g3^-1*g4*g3 g5^-1*g1^-1*g5*g1 g5^-1*g2^-1*g5*g2 g5^-1*g3^-1*g5*g3 g5^-1*g4^-1*g5*g4 gap> # Verify that the matrix generators of S satisfy the relators of G. gap> ForAll( RelatorsOfFpGroup( G ), rel -> One(S) = > MappedWord( rel, FreeGeneratorsOfFpGroup(G), GeneratorsOfGroup(S) ) ); true
crystcat manual