Configuring Tacker as mTLS OAuth 2.0 Client¶
Note
The content of this document has been confirmed to work using Tacker 2024.1 Caracal.
Overview¶
Tacker implements Mutual TLS (mTLS) for OAuth 2.0 Client Authentication based on RFC8705 as an extension of Tacker. As an API client, Tacker can use a mTLS connection to access the Notification server and the External NFVO server.
Guide¶
You can enable Tacker server to support mTLS by the following steps in this guide. In this example, tacker.host is the domain name used by the Tacker server.
Create a private/public Certificate Authority (CA)¶
In order to use mTLS, it is necessary to create a private/public Certificate Authority (CA) as a root certificate that will be used to sign client and Tacker certificates. Although you typically use certificate issued by a public CA, this guide describes how to create a private CA to test the mTLS functionality. If the certificate used for mTLS authentication was issued by a public CA, skip steps 1 and 2.
Generate an RSA private key.
$ openssl genrsa -out root_a.key 4096
Generate a self-signed certificate.
$ openssl req -new -x509 -key root_a.key -out root_a.pem -days 365 You are about to be asked to enter information that will be incorporated into your certificate request. What you are about to enter is what is called a Distinguished Name or a DN. There are quite a few fields but you can leave some blank For some fields there will be a default value, If you enter '.', the field will be left blank. ----- Country Name (2 letter code) [AU]: State or Province Name (full name) [Some-State]: Locality Name (eg, city) []: Organization Name (eg, company) [Internet Widgits Pty Ltd]:IssuingORG Organizational Unit Name (eg, section) []:CertDept Common Name (e.g. server FQDN or YOUR name) []:root_a.openstack.host Email Address []:root_a@issuing.org
If you need to support multiple root certificates, those root certificates should be merged and configured on the server. For example, this guide uses the root_a.pem created previously, and the root_b.pem created in a same way. When creating the root_b.pem, specify the CN as root_b.openstack.host.
In this step, a new multi_ca.pem is created by concatenating two root certificates.
$ cat root_a.pem >> multi_ca.pem $ cat root_b.pem >> multi_ca.pem $ cat multi_ca.pem -----BEGIN CERTIFICATE----- MIIF1TCCA72gAwIBAgIUN7d0MTiikDjDMLxUQ8SJcV97Nz8wDQYJKoZIhvcNAQEL BQAwejELMAkGA1UEBhMCSlAxEDAOBgNVBAgMB2ppYW5nc3UxDzANBgNVBAcMBnN1 ... K/k00vZmrZXONglaf/OeMalhiRaOTsK2CzEvg6Xgu1zOjtNshm6qnSEXDYxzJue2 FPLDGEMKSCLb -----END CERTIFICATE----- -----BEGIN CERTIFICATE----- MIIF1TCCA72gAwIBAgIUOiAEZWTheMS5wFA661G6bushkg4wDQYJKoZIhvcNAQEL BQAwejELMAkGA1UEBhMCY24xEDAOBgNVBAgMB2ppYW5nc3UxDzANBgNVBAcMBnN1 ... UzvplIZcNZKzgOLLrSkk42/yqxdTZnc3BeBiVsA5T6aapNbY8D6ZpPU2cYYSxrfK VpOanJoJy22J -----END CERTIFICATE-----
Create private key and client certificate¶
In order to use mTLS, it is necessary to create a private key and client certificate. Although you typically use a certificate issued by a public CA, this guide describes how to create a self-signed certificate to test the mTLS functionality. If the certificate used for mTLS authentication was issued by a public CA, skip steps 1 to 3.
Generate an RSA private key.
$ openssl genrsa -out tacker_priv.key 4096
Create a certificate signing request.
$ openssl req -new -key tacker_priv.key -out tacker_csr.csr You are about to be asked to enter information that will be incorporated into your certificate request. What you are about to enter is what is called a Distinguished Name or a DN. There are quite a few fields but you can leave some blank For some fields there will be a default value, If you enter '.', the field will be left blank. ----- Country Name (2 letter code) [AU]:JP State or Province Name (full name) [Some-State]:Tokyo Locality Name (eg, city) []:Chiyoda-ku Organization Name (eg, company) [Internet Widgits Pty Ltd]:OpenstackORG Organizational Unit Name (eg, section) []:DevDept Common Name (e.g. server FQDN or YOUR name) []:tacker.host Email Address []:dev@tacker.host Please enter the following 'extra' attributes to be sent with your certificate request A challenge password []: An optional company name []:
Use the root certificate to generate a self-signed certificate.
$ openssl x509 -req -in tacker_csr.csr \ -CA root_a.pem -CAkey root_a.key -CAcreateserial \ -out tacker_ca.pem -days 365 -sha384 Signature ok subject=C = JP, ST = Tokyo, L = Chiyoda-ku, O = OpenstackORG, OU = DevDept, CN = tacker.host, emailAddress = dev@tacker.host Getting CA Private Key
Merge the key and certificate into a single file by concatenating.
$ cat tacker_ca.pem >> tacker_cert_and_key.pem $ cat tacker_priv.key >> tacker_cert_and_key.pem $ cat tacker_cert_and_key.pem -----BEGIN CERTIFICATE----- MIIEdzCCAl8CFGfZSo8q0f0AkmFHrDYAgOygq+X0MA0GCSqGSIb3DQEBCwUAMFYx CzAJBgNVBAYTAkFVMRMwEQYDVQQIDApTb21lLVN0YXRlMSEwHwYDVQQKDBhJbnRl ... kMgBy0mLyN84vqY2GItKdYrBsEUWSif6i3tVTDa1r0gpf2o4PPOHUAaelStm3eqU KFoR418Y432RaxCEPrDOh11PAY80A/xDBhKPYM5XdRlRNtaMmdM4R2p2vw== -----END CERTIFICATE----- -----BEGIN RSA PRIVATE KEY----- MIIEpAIBAAKCAQEAt82fxcWknYkcXUuBZkk1f4M93peFh7PAgpXPMAcknp8dzm97 0veZnyh8a4PP7NBGPoKbuBERsVbd6O6HKn4qd8SYehyQ5oYbUVg5n1YsBnPHVq40 ... 4CmYegzdMh+VcDkN5vQu1wUSucqCXvzIVgNnbvmxbE7ZuDhCAHNhOvs5jPc1sh79 qAEY3/z0kZ3muKc3y9GqjdVzn6JgysXzUZ5bb3LvFe+nTYXsAU9gJw== -----END RSA PRIVATE KEY-----
Enable mTLS for access to Notification server¶
The following parts describe steps to enable mTLS only for access to the Notification server.
Modify the configuration file
tacker.conf
to enable SSL to implement mTLS support. For the settings, specify the path where the certificate file created in the previous chapter is stored. The following settings are examples, and the certificate should be saved in a directory with appropriate access permission.$ vi /etc/tacker/tacker.conf [v2_vnfm] notification_mtls_ca_cert_file = /etc/tacker/multi_ca.pem notification_mtls_client_cert_file = /etc/tacker/tacker_cert_and_key.pem
Restart Tacker service so that the modified configuration information takes effect.
$ sudo systemctl restart devstack@tacker
Enable mTLS for access to External NFVO server¶
The following parts describe steps to enable mTLS only for access to the External NFVO server.
Modify the configuration file
tacker.conf
to enable SSL to implement mTLS support. The client_id and client_password must be obtained from the authentication server used by the External NFVO server. If you are using Keystone as the authentication server, you can use user_id as the client_id for mTLS authentication.$ vi /etc/tacker/tacker.conf [v2_nfvo] use_external_nfvo = True endpoint = https://endpoint.host token_endpoint = https://token_endpoint.host/token client_id = client_id client_password = client_password mtls_ca_cert_file = /etc/tacker/multi_ca.pem mtls_client_cert_file = /etc/tacker/tacker_cert_and_key.pem
Restart Tacker service so that the modified configuration information takes effect.
$ sudo systemctl restart devstack@tacker
Verifying that Access to Each Server Uses mTLS¶
Access to the External NFVO server and the Notification server is not outputted to the Tacker log. Therefore, check the access log of the External NFVO server and the Notification server when executing lcm operations, or use the packet capture software to confirm that the access to each server is the mTLS communication. If the packet capture shows that the client and the server are sending certificates to each other during the handshake, you can verify that mTLS is enabled.